Comments on: EagleTree Logger V4 on the DJI Naza F450 http://fangin.com/blog/2012/06/24/eagletree-logger-v4-on-the-dji-naza-f450/?utm_source=rss&utm_medium=rss&utm_campaign=eagletree-logger-v4-on-the-dji-naza-f450 RC, photos & tech Fri, 13 Mar 2020 08:32:20 +0000 hourly 1 https://wordpress.org/?v=5.1.18 By: mattmc http://fangin.com/blog/2012/06/24/eagletree-logger-v4-on-the-dji-naza-f450/comment-page-1/#comment-4855 Mon, 25 Jun 2012 13:20:10 +0000 http://fangin.com/blog/?p=1428#comment-4855 Hi,

I took some photos and labelled them with the co-ordinates. You can read the description here http://fangin.com/blog/2012/06/26/dji-naza-gps-xyz-co-ordinates/

I don't have any experience with your receiver. All I can say is on mine, I turn on the Tx, set the sticks to where I want them in failsafe, hold the "Set" button on my rx while powering up the receiver. These positions are then saved in the receiver and can be verified by switching off the Tx and watching what happens in the "Calibration" screen of the Assistant software. All the cursors should go to the predefined failsafe locations.

Let me know how you get on with the X,Y,Z co-ordinates.

]]> By: salvador http://fangin.com/blog/2012/06/24/eagletree-logger-v4-on-the-dji-naza-f450/comment-page-1/#comment-4854 Mon, 25 Jun 2012 03:16:31 +0000 http://fangin.com/blog/?p=1428#comment-4854 Hi im from mexico im assembling my dji f450 with naza and gps, right now im waiting for the lipos to arrive so im taking my time to assemble all and yesterday i attached the motors and the arms , today esc and started to plug receiver (rx 802) to the naza mc but right now im having a little trouble on how to mount the gps as well as entering the xzy centimeters on the dji sw assistant i really dont undestand the image can you help me a little bit on that, also i you know something on the fail safe for my devo 8s would appreciate, im from mexico so im sorry if my english is not so well.

]]>