28Sep/110
QuadCopter SCARAB – Motor Mount Retainer
These photos show the retaining screw cut to 7mm and how it penetrates one quadrant of the 12mm aluminium tube divided up by the motor mount. Cut to the right length, it doesn't intrude far enough to cause concern with rubbing on the wire from the ESC to the motor which is routed internally along the tube.
26Sep/110
QuadCopter SCARAB 12 – Assembly part 2
The frame looks well laid out, light weight and just plain good looking. 20AWG is used to connect to the 2213N 800Kv Brushless Motors with just enough left hanging out the end to connect the four speed controllers ( TURNIGY Plush 12amp (2A BEC) BESC ). The only thing I'm unsure about so far is the sorta sharp edges of the aluminium booms and how that might rub against the wires.
