21Jun/100
kf Delta Foamy Version 2
My handmade engine mount on the kf Delta Foamy version 1 wasn't so great. A 3mm square plate of ply hot glued onto a foam "firewall". After a lengthy flight on a 2S 1000mAH battery, the motor wouldn't turn. After taking it apart, I found excess hot glue on the mount had heated up during the flight, come in contact with the rear of the motor and after it cooled, it all gummed up.
So onto version 2. Rudder control, a thicker more consistent step and a Turnigy 2730 Brushless Motor 1500kv (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8618) on a proper engine mount.