26Jul/115
Connecting the BMP085 Baro to the MultiWiicopter Paris V4
The BMP085 Barometric Pressure sensor is mounted on the bottom side of the Paris V4 board. Orientation of the BMP085 is not important but vibration is always an enemy so I used double sided foam tape to mount it. There are four points from the BMP085 that must be connected, VCC, GND, SDA and SCL. In this case they're connected to the LV I2C pads on the bottom side of board to the same points that the BMA180 Acceleromter is connected to on the top
Yellow wire is SCL. White wire is SDA. Red VCC and Black GND.
